A municipal utility facility, a landfill weigh station, a waste transfer site, a service yard, sees the same trucks cross the same access point every day, and that concentrated traffic wears on the soil beneath it faster than a typical road.
Solutions for this Industry
Infrastructure Settlement Control
Pavement Settlement
Void Filling
Sibling Industries
Public Works
Need a Site Assessment?
800-240-7868
A municipal utility facility, a landfill weigh station, a waste transfer site, a service yard, sees the same trucks cross the same access point every day, and that concentrated traffic wears on the soil beneath it faster than a typical road. When that access point settles, it becomes a safety issue for every vehicle that uses it. Municipalities turn to targeted ground stabilization when a utility facility's entrance, exit, or access point needs to be restored without an extended closure.
Municipal utility facilities carry a specific access-point pressure tied to concentrated, repeated heavy vehicle traffic.
Settlement at utility facility entrances, weigh stations, or access points affecting vehicle safety and daily operations
Continuous public service requirements, since a municipal utility facility often can't close to the public or service vehicles for an extended repair
Heavy vehicle traffic, waste trucks, service vehicles, and equipment placing repeated load on facility access points
Aging municipal utility infrastructure at many facilities built decades ago on original foundations
Meeting municipal budget cycles and public agency procurement requirements for any repair work
Municipal utility facilities demand a fix that restores safe access without an extended closure.
Restores safe traffic conditions fast. At a landfill weigh station in Broome County, New York, crews lifted and aligned the entrance and exit slabs in less than two days
Engineered around the municipality's own operational and budget requirements
Addresses the actual settlement, not just the surface. The Broome County project stabilized the subsoils directly before lifting the slabs and aligning the joints
Crews can mobilize on short notice, including nights, weekends, or holidays, so a utility facility repair can be scheduled around service demands
1
Investigation
Facility access point and surrounding subsoil conditions are evaluated through testing before any plan is designed.
2
Planning
Injection design is developed around the municipality's operational schedule and budget requirements.
3
Access
Small-diameter injection points are installed with minimal disruption to facility traffic.
4
Injection
Expanding polymer is placed to stabilize subsoils and lift settled slabs as needed.
5
Monitoring
Real-time tracking confirms alignment and stabilization throughout treatment.
6
Validation
Final inspection confirms safe traffic conditions and joint alignment.
At a landfill weigh station in Broome County, New York, crews stabilized the subsoils, lifted the entrance and exit slabs, and aligned the joints in one coordinated repair, restoring safe traffic conditions rather than patching the surface.
At the Broome County, New York landfill weigh station, settlement measured at 5/8, 3/8, and 1/2 inches at different points was corrected in a single coordinated lift, in less than two days.
In most cases, yes, since there is no excavation and no slab replacement required. The fix stabilizes the soil and lifts the existing slab back to grade.
In most cases, yes. The Broome County, New York landfill weigh station repair was completed in less than two days, minimizing the time traffic was affected.
Concentrated, repeated heavy vehicle loading at a single access point, like a weigh station entrance, wears on the soil beneath it differently than traffic distributed across a larger road, which is why these specific access points often settle first.
Get an expert site assessment and a tailored stabilization solution.
Request a Site Assessment
URETEK
Ground improvement solutions engineered for performance.
Contact Us
Find Local Experts
13900 Humble Road, Tomball, TX 77375
Services
Solutions
800-240-7868
